How to generate Gerber files from CircuitMaker
1. Outputs-Gerber
2. default configuration
3.
GML layer, outline layer, GKO layer, all of them can describle outline. Please choose one of them to generate and make sure the outline in this layer is clear.
4.
5.
6. default configration
7. Then click OK button, it will generate a zip file.
8. Outputs-NC Drill Files
9.
10. Click OK
11. Move the files in NC_Drill.zip to Gerber.zip
12. The new zip file contain gerber and drilling information. You can upload in our website.Fusion PCB
2. default configuration
3.
- pcbname.GTL Top Copper
- pcbname.GTS Top Soldermask
- pcbname.GTO Top Silkscreen
- pcbname.GBL Bottom copper
- pcbname.GBS Bottom Soldermask:
- pcbname.GBO Bottom Silkscreen:
- pcbname.TXT Drills
- pcbname.GML/GKO Board Outline
- pcbname.GL2 Inner Layer2( for ≥4 layer)
- pcbname.GL3 Inner Layer3( for ≥4 layer)
GML layer, outline layer, GKO layer, all of them can describle outline. Please choose one of them to generate and make sure the outline in this layer is clear.
4.
5.
6. default configration
7. Then click OK button, it will generate a zip file.
8. Outputs-NC Drill Files
9.
10. Click OK
11. Move the files in NC_Drill.zip to Gerber.zip
12. The new zip file contain gerber and drilling information. You can upload in our website.Fusion PCB