Seeed Fusion offers Functional Testing and other testing and programming services for PCB assembly orders. Performed after assembly and general inspections, functional testing can help identify boards that fail the reviewed test plan. It does not guarantee that every product function has been covered.
While Seeed will follow the international assembly and quality control guidelines to maximize yield, as with any manufacturing process, there is always the potential for failures. Even more so with small batch or prototype assembly on a mixed line. As such, it is common to employ a functional testing program to isolate defective boards, whether the problem is incorrectly placed parts, failed joints or defective components - defects that may be difficult or impossible to catch with visual inspection alone.
Functional testing can be anything from a simple power-on test, point-to-point voltage testing, to running test firmware with custom-made jigs. Our production lines are equipped with the essentials such as multimeters and function generators but Seeed also has the capability to develop test jigs and perform more advanced testing protocols. Please see the table below for more details. Functional testing may be included for eligible PCBA orders after the test plan, materials, fixture, and production impact are reviewed. The free scope, test coverage, and timing must be confirmed before production.
To add functional testing to your order, just select 100% Functional Testing in the PCBA section of the
order page. Upload your test plan and test materials and add the order to the cart. If the requested testing requires billable time, fixtures, or materials, the cost will be confirmed before production. You can also upload the test plan after adding your order to the cart, or any time before the boards are complete, but make sure to get them in early so we can prepare in advance. The total production time will be extended according to the total testing time required. 100% Functional Testing means every submitted board is tested against the approved test plan. It does not mean every product function is covered or that zero defects are guaranteed. Test duration, fixtures, retesting, and exclusions must be confirmed before production.
Example simple test plan:
1) Apply 9.9V to the contacts as shown.
2) One LED should light up.
3) Change the voltage to 12.6V and press the button once.
4) Five LEDs should light up.
Seeed Fusion PCBA Testing Capabilities
| Category |
Product Function |
Test Type |
Required File |
Test Location |
MCU |
51 serial MCU |
IC Programming |
Firmware |
|
Seeed's Fab |
| AVR serial MCU |
IC Programming |
Firmware |
|
Seeed's Fab |
| ARM Cortex M0,M0+,M3,M4 serial |
IC Programming |
Firmware |
|
Seeed's Fab |
General Features |
GPIO Functional Tes |
Functional Test |
Test Software |
|
Seeed's Fab |
| Voltage/Electricity Current/ Resistance Test |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| I2C/Uart/SPI/CAN/One wire/SWD |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| Temperature/ Humidity/ Atmospheric Pressure/ Luminance |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| More |
|
|
|
|
Communication |
GSM/WCDMA/LTE |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| GNSS |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| Bluetooth/LE |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| Ethernet |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| NFC |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| 802.11/b/g/n/a/ac |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| zigBee |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| Sub-1 GHz 315/433/868/915 |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| Monoboard Computer |
Beagle Bone/Raspberry pi/…… |
Functional Test |
Test Software |
Test Index |
Seeed's Fab |
| Certificate |
FCC/CE/GS/Telec/…… |
Regulatory Certification |
Test Software |
Test Index |
Lab |
Please note, high precision testing and high voltage testing or any operations that pose a health risk to technicians will not be accepted. Customers will be expected to pay for any specialist tools or materials required for testing.Last Modified 2026/11/19
Functional testing covers only the reviewed test plan and fixture. It does not guarantee that every product function has been tested or that zero defects exist. Test coverage, sample size, duration, fixture cost, retest, and failure handling must be confirmed before production.Functional testing is performed against an approved test plan. If 100% Functional Testing is requested and accepted, each board is tested against that plan. Confirm the applicable free-testing scope and any additional fixture, tool, material, testing-time, or retest requirements before production.