What is the depth and width of the v-cuts/grooves?
Typically, the depth of the v-cut/groove/score is 1/3 of the thickness of the board. So if you want v-cuts we recommend that you select a thickness greater than 0.8mm or the boards may break directly.
The width of the v-cut line is 0.4mm. An electrical clearance of 0.8mm is required from the center of the v-cut line to any traces. Please bear this in mind when designing your panels.
Related Articles
Fusion Advanced PCB Specification
The Seeed Fusion Advanced PCB service caters for more complex requirements. Material FR4 TG130/TG170 High Frequency Board Default (if not otherwise specified) TG170 Please request when placing the order Rogers, Taconic, Arlon, Rogers 4350, Rogers ...
What are the PCB panelization rules?
日本語 Such orders can directly be placed on Seeed Fusion Service. A. There is no extra cost for identical design panelization. ie. If you choose "Different Designs = 1" that means there is only one design in your PCB Gerber file. So if you want to ...
Fusion PCB Specification
PCB Gerber Files 日本語版 The Gerber format is an open 2D binary vector image file format. It is the standard format used by the printed circuit board (PCB) industry software to describe the printed circuit board images: copper layers, solder mask, ...
Seeed Fusion PCB upload error: Outline not found
Please ensure you have an outline drawn in one of the files, ideally in a dedicated outline layer and that this layer is named appropriately (.GML, outline etc.) All PCB orders require a board outline to tell us how to cut out the boards. The Seeed ...
What size PCBs can Seeed Fusion manufacture?
日本語 The size of the laminates available depends on the type of PCB base material. For standard FR-4 TG130: from 10 x 10mm to 500 x 500mm. For Aluminum boards: from 10 x 10mm to 300 x 300mm For FPC: from 3 x 3mm to 100 x 100mm What can I do if my ...