What should I do if my Gerber files are too big (over 4MB)?
Please only include one set of Gerber files, drill files and any other necessary files in your upload. Schematics, BOM files, DRC files etc. are not necessary and will only make it harder for the engineers to find the necessary data.
If your Gerber files are too large, please ensure that filled areas such as copper pours have a line width greater than 0.
Related Articles
How to generate Gerber files from Proteus
1. Output-Generate Gerber/excellon Files 2. Set the folder Output to a single ZIP file. Tick off the layers you want.(Proteus may tick off them for you) Gerber Format is in RS274X Click OK 3. Now we get this file, please use it to place a PCB order.
How to generate Gerber files from CircuitMaker
1. Outputs-Gerber 2. default configuration 3. pcbname.GTL Top Copper pcbname.GTS Top Soldermask pcbname.GTO Top Silkscreen pcbname.GBL Bottom copper pcbname.GBS Bottom Soldermask: pcbname.GBO Bottom Silkscreen: pcbname.TXT Drills pcbname.GML/GKO ...
How to generate Gerber files in Altium Designer
1. File-Fabrication Outputs-Gerber files 2. Select the parameters. If you don't know the exact meaning of the parameters. You can follow like the picture. If you want to make PCB, you need these layers. Please make sure you have the clear outline in ...
How to generate Gerber and Drill files from Fritzing
Many thanks to Kimio Kosaka for providing the guide: The procedure is explained using the Gerber data output from the example circuit "Countdown.fzz" supplied with Fritzing. 1. Change to the "PCB" edit mode on your Fritzing. And click the "Export for ...
How to generate Gerber and Drill files from Eagle
Exporting manufacturing files from Eagle is very simple and the least likely to run into problems. With the use of pre-configured CAM job files, there is no need to change export settings. Even better, in the later versions of Eagle, the Seeed Fusion ...