日本語

Please make a BOM file which follows this template so that the website can read it correctly.

• Check the BOM format, only CSV, XLS or XLSX files accepted.
  
• Check the BOM content, only allow four rows of information in the BOM, which is Designator, MPN(Manufacturer Part Number) Qty(Quantity) and Link.
  
  

• The website only recognizes commas to distinguish the designator. 

         

• The designator should be ≤(less than or equal) to the Quantity (QTY).
  

• Please use the Manufacturer Part Number as highlighted in red, do NOT use the Digi-key or Mouser Part Number.       

• Do not include components in the BOM that you do not need us to solder onto the boards.
  Incorrect
  
  correct       
  
  

• If the system cannot match the components, please help to fill in the purchase link (you can fill in the official link or Digi-key/Mouser link).

  

• Blog to guide you how to place a PCBA order.
  

http://www.seeedstudio.com/blog/2018/03/23/seeed-pcba-series-3-how-to-get-pcb-assembly-quotes-in-seconds/