Will Fusion check the Gerber files after I place an order?

Will Fusion check the Gerber files after I place an order?

After order payment is successful and confirmed, your order will be automatically assigned to a professional cam engineer to review your Gerber files.
  • If there is no production problem with the file, we will produce the PCB exactly as designed.
  • If there is a production problem with the files, we will communicate it to you through your registered e-mail address. Please monitor your mail regularly after submitting an order. We aim to notify you of any issues as soon as possible.

    • Related Articles

    • How to generate Gerber and Drill files from Fritzing

      Many thanks to Kimio Kosaka for providing the guide: The procedure is explained using the Gerber data output from the example circuit "Countdown.fzz" supplied with Fritzing. 1. Change to the "PCB" edit mode on your Fritzing. And click the "Export for ...

    • How to generate Gerber and Drill files from Eagle

      Exporting manufacturing files from Eagle is very simple and the least likely to run into problems. With the use of pre-configured CAM job files, there is no need to change export settings. Even better, in the later versions of Eagle, the Seeed Fusion ...

    • Fusion PCBA Specification

      日本語版 PCB Assembly Order Flow Chart The lead time for PCB Assembly orders is around 7-15 business days if all the parts are from the Seeed's OPL and around 20-25 business days if not. Fusion PCBA Specification Fusion PCBA Specification Order Quantity ...

    • What is the Lead Time for Seeed Fusion PCB Assembly orders?

      Lead time is defined as the time from order confirmation to dispatch from the warehouse. It consists of the PCBA production time + warehouse packing time. Average production time for PCBA orders using externally sourced parts: Production time (20 ...

    • Will Fusion service order page automatically measure my board dimensions?

      On the Fusion order page, once you upload your Gerber archive, the system will automatically try measure the board dimensions and input the result in the Board Dimensions field for you. However, for complex outlines and incorrectly generated Gerber ...